CHANGING THE RUBBER SEAL OF A FAUCET – How To Change The Water Faucet Sealing Rubber

Several causes are possible, but in most cases, leaky faucets are affected by a seal problem. So, find out how to change the faucet sealing rubber (rubber or tick) following our step by step or you can check our website for more information on the website:

• First, you need to remove the cap to unscrew the faucet handle (handle or crosspiece);
• Then remove the repair with the help of a spanner to remove and replace the rubber seal. Before doing this, wrap the metallic part of the faucet in adhesive tape so as not to scratch it with the spanner;
• If the repair has a dirt buildup, dip it in white vinegar and scrub it with a brush to remove the dirt.
• If the sealing rubber is damaged, you will need to purchase a replacement part. It is essential to replace the used rubber with a model of the same type and size, do not hesitate to go to a store that sells parts for faucets with your old rubber seal to compare better and not buy the wrong one!
• Now all you have to do is reassemble the device, replacing the rubber seal. Usually, tap leakage should no longer occur!

How To Change The Faucet Repair?

Learn how to change the repair of a faucet that doesn’t close properly and keeps leaking. Most leaks in a faucet valve are caused by wear on the repair (cartridge). The cartridge is the part located under the water opening system:

• To exchange the repair, remove the cross from the faucet to access the repair.
• Remove the old model with the help of a spanner and replace it with an identical new one.
• Now, all you need to do is put the faucet back on and make sure you don’t have to close the faucet hard anymore to stop it from dripping.
• Don’t hesitate to take the old model with you to the hardware store to avoid buying the wrong repair model. Compare and buy the same cartridge or equivalent without making any mistakes.

Cleaning

Sometimes a faucet can leak simply due to limescale buildup, particularly in the valves. For thorough cleaning, disassemble the faucet elements without breaking them and soak for several hours in white vinegar. Do not hesitate to scrub with a brush to remove stubborn residues. Then reassemble and test the components or visit today a good plumber.